Are there any risks involved in trying to remove the tiles on my own? First, the old tiles need to be removed from a ceramic tiled floor. Over-tiling with thin porcelain tiles may be possible sometimes, but the increased thickness of the floor usually prohibits this choice.

Floor tile removal is a simple yet time-consuming task. Depending on the subfloor and the installation style, it might be challenging, especially with older systems. Consider hiring a Gilbert tile removal company that uses a dust-free tile removal method.

Using Gilbert Dust Free Tile Removal To Remove Old Tiles

If you encounter one of these floors, a hand-held power scraper may be worth the investment. These are excellent for fine chipping.

For more extensive or more problematic flooring, it is recommended that a wheeled-mounted medium- or heavy-duty floor tile lifter be used. An adjustable frame, wide diameter wheels, and a large blade angle setting are standard features for better machines.

You can save a lot of money by conducting your tile removal even if you don’t require any special equipment, especially if the tile was installed on a concrete slab or a steel-reinforced solid mortar base.

Removing the tile is significantly more straightforward if glued to plywood or cement board. When specially planned tile adhesives were introduced in the 1970s, floor tiles could be attached directly to a plywood or cement-board underlayment. This method quickly supplanted the old mortar-bed system. In addition, this installation style makes it relatively simple to separate the tiles from the substrate.

A hammer drill with a chisel attachment helps speed up floor tile removal from a plywood or cement-board base, but essential hand tools are all that is required. However, using a hammer drill on a plywood or cement-board sub-floor can cause extensive repair work, so be prepared.

Professional Floor Sanding and Refinishing Services in Gilbert, AZ

It’s also essential for the do-it-yourself tiler to know that removing tiles might produce a significant amount of fine dust. Instead, use plastic sheeting to create a barrier around your work area to keep dust from traveling throughout your home.

Wear a dust mask, safety goggles, earplugs, and heavy-duty work gloves when removing old tiles. Damage can be done to your eyes if you use a hammer and chisel while working with tile or adhesive. Wear long sleeves and thick gloves when tearing down tile because the shards can be pretty sharp.

Even on extensive floors, ceramic tile destruction generates a significant amount of garbage that must be disposed of. Builders’ merchant sand or ballast bulk bags are suitable since they may be emptied of their contents and stored in one place.

Preparation Is Key

To avoid damaging other items in the room, prepare your work area. With a flat-edged pry bar and hammer, remove all moldings, trim, door frames, and doors that will interfere with tile removal.

As a result, they are protected against damage and dust accumulation throughout the demolition procedure.

Where to Get Help for Healthy Floor Removal in Gilbert, AZ?

Plastic sheets can keep dust at bay by covering open entrances. In addition, it’s a good idea to cover up your bathtubs, sinks, and showers. It’s possible that huge, sharp tiles blasted into your sink, tub, or shower tray will scratch your skin.

These locations can be protected from falling tiles by using cardboard. In addition, an old sheet can cover them for additional safety.

Kodiak Dustless can be contacted directly, or you can fill out a short form to get an immediate response.

You can check out customer reviews here, ‘SoTellUs’ and the for more information.